A Cut Above. |
(937) 667-4476 |
Home
W14231-2 Flute PCD Pressure Coolant Reamer
Information:
Customer needed to reduce cycle time in order to meet increased capacity requirements. This tool, in combination with WINCO tool #W14225, cut 10 sec/part out of the cycle. This equals approximately 15% reduction in cycle time and increased capacity of this cell by 4,370 parts per year. Down time was also greatly reduced by eliminating boring head adjustments and insert changes.s.
Download Supporting Documents
Additional Information:
To receive additional information and/or to inquire on W14231-2 Flute PCD Pressure Coolant Reamer click here.
W15335-4 Flute PCD Tipped Pressure Coolant Reamer
Information:
These five single pass PCD form tools took the place of (25) operations. The cycle time was reduced from 41 minutes to 28 minutes. Besides the obvious savings in production costs, these tools reduced cycle time so much that they allowed the engineer to postpone indefinitely the planned purchase of one or two more $300,000 machining centers to keep up with increased production rates. These tools were able to machine from as cast and also from solid and achieve bored tolerances. (Typically + .0004" to + .0005") and finishes in the single digits.
Download Supporting Documents
Additional Information:
To receive additional information and/or to inquire on W15335-4 Flute PCD Tipped Pressure Coolant Reamer click here.
W15392-4 Flute PCD Tipped Pressure Coolant Reamer
Information:
Customer originally was using a PCD Inserted Boring Bar and having trouble achieving finish and cycle time requirements. A 20 minute or longer set up time was a major problem as well. Customer currently running in seven Brother machines and due to WINCO tool success WINCO has been given an opportunity to replace most of the inserted tools as well as new applications.
Download Supporting Documents
Additional Information:
To receive additional information and/or to inquire on W13063-4 Flute PCD Tipped Pressure Coolant Reamer click here.
W13063-4 Flute PCD Tipped Pressure Coolant Reamer
Information:
Customer originally was using a PCD Inserted Boring Bar and having trouble achieving finish and cycle time requirements. A 20 minute or longer set up time was a major problem as well. Customer currently running in seven Brother machines and due to WINCO tool success WINCO has been given an opportunity to replace most of the inserted tools as well as new applications.
Download Supporting Documents
Additional Information:
To receive additional information and/or to inquire on W13063-4 Flute PCD Tipped Pressure Coolant Reamer click here.
W13594-2 Flute PCD Tipped Pressure Coolant Reamer
Information:
The customer was experiencing a finish problem during acceptance runs on the equipment micro finishes were greater than 40, and the customer was also concerned about the cost of the tool. The Winco tool consistently runs under a 10 micro, and reduced annual cost by approximately $13,700.
Download Supporting Documents
Additional Information:
To receive additional information and/or to inquire on W13594-2 Flute PCD Tipped Pressure Coolant Reamer click here.